Experimental Physics and
Industrial Control System

Korhonen Timo <[email protected]> · Wed, 17 Nov 2010 12:08:31 +0100

Dear all,
the enhancements to mca (Matlab Channel Access) that I announced in the
last EPICS meeting are now

available (except the GUI objects - those are not really part of the
mca. They will follow later - if there

is interest..)

After consulting with Kay Kasemir we decided to put the code into
SourceForge (sorry APS folks,

I know you have problems with it) epics-applications project:

https://sourceforge.net/projects/epics/
The code is in CVS:/extensions/mca
It has been in use here at PSI for a while (apart from one small change
in egu handling) on our

Scientific Linux 5 machines and I am not aware of any open issues.
Please take a look at the code and see if it works on other platforms
and with Octave.

Do not hesitate to point out problems - I am not very experienced in
matlab interface API

and my C++ skills also need some brushing up...
The main changes are listed in the release note (for version 4.2)
cheers,
Timo
--

Timo Korhonen PSI (Paul Scherrer Institut, http://www.psi.ch)
CH-5232 Villigen PSI
tel + 41- 56 3103262 fax + 41 - 56 310 5090
e-mail: [email protected]

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System