EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Eurotherm Temperature Controller Support
From: Stephen Lewis <[email protected]>
To: Chris Whiting <[email protected]>
Cc: [email protected]
Date: Mon, 18 Oct 2010 06:45:39 -0700
Here is a module and and ioc build that implements a small set of Eurotherm gets and sets.  The approach to using the modbus is somewhat unusual by EPICS conventions but you may find parts of it useful.  It has run reliably for a year.  Done with EPICS R3.14.9.

Attachment: eurotherm-ioc.tgz
Description: Binary data

Attachment: eurotherm-module.tgz
Description: Binary data


On 15 Oct 2010, at 12:26 , Chris Whiting wrote:

> I am developing an automated vacuum bakeout station for CHESS at Cornell University. I have been searching for temperature controllers which allow for 10 (or more) PID control loops, and have come across the Eurotherm 2704VC controller (this particular controller has extra inputs and outputs for vacuum equipment).
> 
> Another goal of the project, in addition to building a working bakeout station, is to use, and learn more about, the EPICS control system. I have found support written originally for the Eurotherm 800 series controllers on the Modules page, and have been told it works for the 2000 series even though it should not.
> 
> I am wondering if anyone has developed support specifically for the 2704 Eurotherm controller using the newer Modbus module or StreamDevice methods (or other newer methods), as these were not available when the support for the Eurotherm 800 series was developed.
> 
> Suggestions or comments about using the Eurotherm 2704/2500 temperature controllers for this application would also be welcomed.
> 
> Thank you for your help.
> 
> Chris Whiting
> CHESS
> Cornell University


References:
Eurotherm Temperature Controller Support Chris Whiting

Navigate by Date:
Prev: Re: CSS XY Graph show/hide traces PaweÅ PrÄdki
Next: Re: Manipulating time in records Dirk Zimoch
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: Eurotherm Temperature Controller Support emma.shepherd
Next: Error compiling sncseq-2.0.99 on MacOSX 10.6 (Snow Leopard) and possible patch (attached) Juan.Guzman
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 19 Oct 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·