Hi Jerome,
On Monday 11 October 2010 10:08:02 Jerome HOSSELET wrote:
>
> I have some troubles with a motor driver v 6.5.1 and EPICS base 3.14.11 and
> VxWorks 6.8
>
> VxWorks 6.8 : install ok
> Base EPICS 3.14.11 : compilation ok
> Support motor 6.5.1: compilation ok
We found a problem with our munching of vxWorks binaries when used with the
later vxWorks 6.x versions that use the GNU C++ 4.x compilers, and I wonder if
this might be related to what you're experiencing since I believe the Motor
record has C++ code in it. There is a patch on the Known Problems page for
R3.14.11 which you should try in case it fixes the issue (and you should
probably look at the other patches there too in case any of them apply to your
usage):
http://www.aps.anl.gov/epics/base/R3-14/11-docs/KnownProblems.html
HTH,
- Andrew
--
If a man is offered a fact which goes against his instincts, he will
scrutinize it closely, and unless the evidence is overwhelming, he will
refuse to believe it. If, on the other hand, he is offered something
which affords a reason for acting in accordance to his instincts, he
will accept it even on the slightest evidence. -- Bertrand Russell
- References:
- No HomeStatus and No Motion with OMS MAXv : Motor 6.5.1 / VxWorks 6.8 / base 3.14.11 Jerome HOSSELET
- Navigate by Date:
- Prev:
Re: gateway putlog Andrew Johnson
- Next:
Re: gateway putlog Ben Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: No HomeStatus and No Motion with OMS MAXv : Motor 6.5.1 / VxWorks 6.8 / base 3.14.11 Daron Chabot
- Next:
Timeout errors with ASYN Modbus Driver 2.0 David Dudley
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|