Experimental Physics and
Industrial Control System

Eric Norum <[email protected]> · Thu, 12 Aug 2010 18:35:25 -0700

Aren't there asynSyncIO iocsh functions that could perform this?

On Aug 12, 2010, at 5:07 PM, Andrew Wagner wrote:

> Hey everyone, 
> 
> I've created an Epics function drvAsynIPBootMsg based on the TDS3000Reboot function in vxi11. The function connects to a socket exactly as in TDS3000Reboot but here the user can input both a port number and custom boot/init string. For example when I want to boot my PROLOGIX-Ethernet GPIB controller I issue 
> 
> drvAsynIPBootMsg("172.25.100.85",1234,"++mode 1\n++auto 0\n++addr 9\n++eot_enable 0\n")
> 
> in st.cmd before issuing drvAsynIPPortConfig . These commands are necessary for the PROLOGIX interpreter to GPIB commands that my driver sends it correctly. Here the IP address is 172....., the port is 1234 and the last string is the message. The command is registered in drvAsynIPPort . So far this is just my private code and I was wondering if I could commit it somewhere or submit it to an expert for approval. If anyone is interested let me know and I'll send it to you. 
> 
> Cheers, 
> 
> Andrew
> 
> 
> 
> 

-- 
Eric Norum
[email protected]

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System