Experimental Physics and
Industrial Control System

George Lahti <[email protected]> · Thu, 05 Aug 2010 18:58:22 -0400

Ralph Lange wrote:
Caveat: you might have to integrate things like a "voltage threshold
setpoint" or a "temperature range selector" or reading back a
setpoint, which need a bit more thought.

R123GSET and R123GSETr

for the RF Gradient Setpoint setpoint and what is readback from the
hardware.
R123GMES
for the RF Gradient Measured signal.
R = RF
1 = area #1 (north linac)
2 = zone #2
3 = cavity #3
Bye ...... G.Lahti

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System