Experimental Physics and
Industrial Control System

David Dudley <[email protected]> · Thu, 05 Aug 2010 17:12:40 -0400

OK, I went back and did build clean, and then a build.

The softIoc problem in base I had not patched for, and upon adding that
patch, base builds with no problem.

Where I was having the problem, was in building the 'extensions' directory.
A number of them appear to believe that the include files are at
'../include', along with the 'configure' and 'bin' directories.

Not a big deal, as most of those aren't used in building the IOC trees, but
it creates a problem for those hosts that need everything.

David

On 8/5/10 4:24 PM, "Andrew Johnson" <[email protected]> wrote:

> Hi David,
> 
> On Thursday 05 August 2010 14:50:00 David Dudley wrote:
>> 
>> Sorry for the discouraging remark, but setting "INSTALL_LOCATION" didn't
>> work for me, when I built things for Darwin.
> 
> Bug reports are never discouraging, please report them as you find them so we
> can save everyone else from duplicating the work to find a fix.  There was one
> problem (with a patch provided on the Known Problems page) which caused a
> build failure in the src/softIoc directory, but I'm not aware of any other
> issues.
> 
>> In order to successfully complete the build, I had to create symlinks to
>> the installed location for the 'bin', 'configure', and 'include'
>> directories.
> 
> I'm having no trouble building a fully-patched and clean 3.14.11 on Linux or
> Darwin with INSTALL_LOCATION set.  However I did have problems when I forgot
> to do a 'make clean' though, could that have been the issue?
> 
> - Andrew

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System