EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <2010>  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <2010>  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Re: Support for Omega CN-7500 temperature controller
From: John Dobbins <[email protected]>
To: "Xu, Huijuan" <[email protected]>
Cc: "[email protected]" <[email protected]>
Date: Sat, 26 Jun 2010 12:49:16 -0400
Huijuan,

I have support for a similar device, CN7600, using StreanDevice 2 and Modbus Ascii mode of controller. I added a checksum converter to StreamDevice for this purpose. This support might be easily adapted.

John Dobbins

Lab for Elementary Particle Physics
Cornell University


Xu, Huijuan wrote:
Hello,

We got a lot of Omega CN-7500 temperature controllers that uses Modbus over RS-485. Does anyone have a streamdevice protocol or any other device/driver support for that? Thanks.



Regards,

Huijuan


References:
Support for Omega CN-7500 temperature controller Xu, Huijuan
Navigate by Date:
Prev: Support for Omega CN-7500 temperature controller Xu, Huijuan
Next: error building latest rtems Silver
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <2010>  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Support for Omega CN-7500 temperature controller Xu, Huijuan
Next: error building latest rtems Silver
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <2010>  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024