I have the fink openmotif3 2.2.4-4 package installed on my OS X
machine. Seems to work well with MEDM, EDM, StripTool and SDDSplot.
MEDM is an extension:
Download the extensions configuration files from EPICS Extensions
Config Files
<http://www.aps.anl.gov/epics/extensions/configure/index.php>
Unpack the config file tarball.
cd to the extensions directory created by unpacking the tarball.
This directory will be referred to as the extensions <TOP> from now on
Edit the configure/RELEASE file top refer to where you have EPICS
base installed.
Edit the configure/os/CONFIG_SITE.darwin-x86.darwin-x86 file and set
up the correct references to your X11 and Motif packages.
cd to the <TOP> directory and run make
Now to download and build an extension -- medm in this case:
Download the medm tarball: MEDM 3.1.4
<http://www.aps.anl.gov/epics/download/extensions/medm3_1_4.tar.gz>
cd to the <TOP>/src directory and unpack the medm tarball
cd to the <TOP>/src/medm directory and run make
On Jun 21, 2010, at 6:06 PM, Andrew Wagner wrote:
Hey guys,
I'm new to EPICS and have compiled both EPICS base and Asyn
successfully on my OS X 10.6.3 MacBook Pro. It seems that much of
the driver support includes pre-made MEDM screens. Is there a good
how-to manual for installing MEDM on OS X (or any os)? I've searched
tech-talk and there definitely seem to be some pitfalls. For
instance Motif 2.30 should be used instead of 2.32 to avoid some odd
behavior. Thanks very much for the help.
Andrew Wagner
--
Eric Norum
[email protected] <mailto:[email protected]>