EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: state machine programming
From: [email protected]
To: EPICS tech-talk <[email protected]>
Date: Sat, 29 May 2010 17:39:43 -0700
Hello,

I know about the sequencer.
I believe it only works at the IOC level (doesn't work with several IOC)
Well at least, I believe the seq cannot work (easily) on other things but PVs (ex send email, mv files)

I am therefore looking for a high level state machine programming.
(I heard about APS Procedure Execution Manager)

What are you using?
Opensource, in-house, Commercial software?

I went as far as thinking about using the Qt event handler (slot, signal) which is may do the trick!
But ultimately, I would like to have something which is highly graphical, possibly with drag and drop, etc.
and minimum programming.

Is there such a thing?

-- 
Emmanuel

Replies:
Re: state machine programming Ben Franksen
Re: state machine programming J. Lewis Muir

Navigate by Date:
Prev: Re: building base on cygwin1.7 Pete R Jemian
Next: Re: state machine programming Ben Franksen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: building base on cygwin1.7 Pete R Jemian
Next: Re: state machine programming Ben Franksen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024