Experimental Physics and Industrial Control System
Subject: |
building areaDetector firewire support on Windows |
From: |
John Dobbins <[email protected]> |
To: |
EPICS Tech-Talk <[email protected]> |
Date: |
Thu, 27 May 2010 11:29:08 -0400 |
All,
I wen to build areaDetector with Microsoft Visual Express edition but in the directory firewireWinSrc I run into the error
C:\USER_LOCAL\epics\support\areaDetector-1-6\ADApp\firewireWinSrc>make
make -C O.win32-x86 -f ../Makefile TOP=../../.. T_A=win32-x86 install
make[1]: Entering directory `C:/USER_LOCAL/epics/support/areaDetector-1-6/ADApp/firewireWinSrc/O.win32-x86'
make[1]: *** No rule to make target `../../../include/os/WIN32/afxwin.h', needed
by `firewireWinDCAM.obj'. Stop.
make[1]: Leaving directory `C:/USER_LOCAL/epics/support/areaDetector-1-6/ADApp/firewireWinSrc/O.win32-x86'
make: *** [install.win32-x86] Error 2
Which as far as I can tell is because the Express Edition does not include the MFC SDK. I don't think MinGW does either.
I had previously used Visual Studio 2005 so I didn't run into this problem.
Ideas?
John Dobbins
Laboratory for Elementary Particle Physics
Cornell University
- Replies:
- RE: building areaDetector firewire support on Windows Mark Rivers
- Navigate by Date:
- Prev:
RE: a waveform record question Mark Rivers
- Next:
RE: building areaDetector firewire support on Windows Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Epics 3.14.8: faulty registrar statement in dbd causes memPartAlloc error on vxWorks Goetz Pfeiffer
- Next:
RE: building areaDetector firewire support on Windows Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024