Experimental Physics and
Industrial Control System

All,

I wen to build areaDetector with Microsoft Visual Express edition but in the directory firewireWinSrc I run into  the error



C:\USER_LOCAL\epics\support\areaDetector-1-6\ADApp\firewireWinSrc>make
make -C O.win32-x86 -f ../Makefile TOP=../../.. T_A=win32-x86 install
make[1]: Entering directory `C:/USER_LOCAL/epics/support/areaDetector-1-6/ADApp/firewireWinSrc/O.win32-x86'
make[1]: *** No rule to make target `../../../include/os/WIN32/afxwin.h', needed
 by `firewireWinDCAM.obj'.  Stop.
make[1]: Leaving directory `C:/USER_LOCAL/epics/support/areaDetector-1-6/ADApp/firewireWinSrc/O.win32-x86'
make: *** [install.win32-x86] Error 2

Which as far as I can tell is because the Express Edition does not include the MFC SDK. I don't think MinGW does either. 

I had previously used Visual Studio 2005 so I didn't run into this problem.

Ideas?

John Dobbins

Laboratory for Elementary Particle Physics
Cornell University

Replies:

RE: building areaDetector firewire support on Windows Mark Rivers

Navigate by Date:

Prev: RE: a waveform record question Mark Rivers

Next: RE: building areaDetector firewire support on Windows Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <2010>  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Epics 3.14.8: faulty registrar statement in dbd causes memPartAlloc error on vxWorks Goetz Pfeiffer

Next: RE: building areaDetector firewire support on Windows Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <2010>  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024