Hi Dirk,
I am just writing protocol files for a Lauda chiller unit (RE 304 and RE 306).
http://www.lauda.de/hosting/lauda/website_en.nsf/urlnames/kaeltethermostate_produkte
It requires floats as parameters in a special way:
Example "OUT SP 00 20.01"
The parameter here can range from 1 to 3 digits in front and 2 digits behind the
decimal point.
If I use %6.2f it will work for "120.01", but will write " 20.01" in case of the
value "20.01".
The extra blank will cause the unit to flag the command as error.
I can use the "-" modifier to get rid of the leading space...
But then the string sent looks like "20.01 " and the unit will again
complain. Can I suppress leading and trailing spaces?
Cheers, Burkhard
--
Dr. Burkhard Kolb
Tel +49 6159 712667
GSI Helmholtzzentrum für Schwerionenforschung GmbH
Planckstraße 1 | D-64291 Darmstadt | www.gsi.de
Gesellschaft mit beschränkter Haftung
Sitz der Gesellschaft: Darmstadt
Handelsregister: Amtsgericht Darmstadt, HRB 1528
Geschäftsführung: Professor Dr. Dr. h.c. Horst Stöcker, Christiane Neumann, Dr. Hartmut Eickhoff
Vorsitzende des Aufsichtsrates: Dr. Beatrix Vierkorn-Rudolph
Stellvertreter: Ministerialdirigent Dr. Rolf Bernhard
- Replies:
- Re: stream device formatting question Eric Norum
- Navigate by Date:
- Prev:
CA web service Re: iPhone port Kasemir, Kay
- Next:
Re: stream device formatting question Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: a waveform record question Mark Rivers
- Next:
Re: stream device formatting question Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|