Experimental Physics and Industrial Control System
I just ran into a problem running dxp 2-10 and EPICS 3.14.9 compiled
on a Windows PC running cygwin 1.7 (first release Dec 2009). The app
runs fine on the same machine running cygwin 1.5. The app runs but
after configuring the hardware, then sending or receiving an unknown
number of PV updates, it refuses further updating, and as far as I
can tell it just idles. SoftIoc works fine with my simple tests. I
haven't had time to run proper diagnostics, opting to just revert and
get the users going. I'm still digging through the Tech Talk archives,
but I haven't found any mention of this, so far. I was just wondering
if this has already been discussed or dealt with (e.g. perhaps EPICS
3.14.10+ has dealt with it?).
ru
--
Ru Igarashi Software & Instrumentation Specialist
e-mail: [email protected] Canadian Light Source
ph:306 657 3751 University of Saskatchewan
fax: 306 657 3535 Saskatoon SK S7N 0X4
- Replies:
- RE: cygwin 1.7 compatibility Wang Xiaoqiang
- RE: cygwin 1.7 compatibility Mark Rivers
- Navigate by Date:
- Prev:
RE: MEDM Panels disappeared frequently on Fedora Code 8 32 bit version... Mark Rivers
- Next:
RE: cygwin 1.7 compatibility Wang Xiaoqiang
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Argonne Network Maintenance this weekend Andrew Johnson
- Next:
RE: cygwin 1.7 compatibility Wang Xiaoqiang
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024