On Thursday 29 April 2010 14:41:18 Mark Rivers wrote:
> A little more investigation shows that in snc/Makefile there is the
> following:
>
> # Lex library
> SYS_PROD_LIBS_WIN32 += -nil-
> SYS_PROD_LIBS_cygwin32 += -nil-
> SYS_PROD_LIBS_Linux += fl
> SYS_PROD_LIBS_DEFAULT += l
>
> So Linux does require the Lex library. On Fedora you could install this
> with "yum install flex".
I really don't think that the flex library should be needed since Base
includes its own copy of flex. I would suggest commenting out *all* of the
lines mark listed above from the Makefile, I just tried it and it worked for
me.
- Andrew
--
The best FOSS code is written to be read by other humans -- Harald Welte
- Replies:
- RE: Problem Building SNC/SEQ Module Pawel Kowalski - BiRa Systems Inc.
- References:
- Problem Building SNC/SEQ Module Pawel Kowalski - BiRa Systems Inc.
- RE: Problem Building SNC/SEQ Module Mark Rivers
- Navigate by Date:
- Prev:
RE: Problem Building SNC/SEQ Module Mark Rivers
- Next:
RE: Problem Building SNC/SEQ Module Pawel Kowalski - BiRa Systems Inc.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Problem Building SNC/SEQ Module Mark Rivers
- Next:
RE: Problem Building SNC/SEQ Module Pawel Kowalski - BiRa Systems Inc.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|