Experimental Physics and
Industrial Control System

"Pawel Kowalski - BiRa Systems Inc." <[email protected]> · Mon, 15 Mar 2010 08:33:22 -0600

Hi Phillip,

Although I do have the DSC module installed I know I've been able to use the
EPICS I/O client in LabView without this. I'm a little surprised that you
need to download anything to get this installed on your end, from what I
understand epics support was supposed to be built in right out of the box in
LabView 2009 and I know that I never had to download anything off the NI web
site to get this going. When installing LabView off the CD do you not have
an option for an epics client?

------------------------------------

Pawel Kowalski
BiRa Systems Inc.
www.bira.com

Phone:		505-881-8887
Fax:			505-888-0651

Address:		2410 Midtown PL NE 
       STE A
       Albuquerque NM 87107 USA

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Philip Taylor
Sent: Monday, March 15, 2010 8:27 AM
To: EPICS tech-talk
Subject: LabVIEW EPICS I/O Server

I am trying to use the "native" (NI-supplied) EPICS I/O Server support for
LabVIEW 
2009 without the LabVIEW Datalogging and Supervisory Control (DSC) module.

I followed the relevant download and installation instructions, as shown in
this page:
http://zone.ni.com/devzone/cda/tut/p/id/10812

Its worth mentioning that step 5 as shown on that page (and the file 
'epicsreadme.txt')  is identical to Step 2. I assume this is an error and
should in 
fact state that a further software installation is to be done from the .msi
file in 
folder EPICS_LVSupp_90?

Anyway, having performed the installation and restarted the National
Instruments 
Variable Engine, I right-click on 'My Computer' target in a new Project
window, 
select 'New>I/O Server' from the shortcut menu, select 'EPICS Client' option
(this 
does appear) and finally click the 'Continue..' button.

A 'Configure EPICS Client I/O Server' dialog box should appear. But for me,
nothing 
happens at all after I click the 'Continue' button. so I cannot configure an
EPICS 
I/O Server.

I have repeated this installation now on 3 separate PCs, all behave the
same. All 
are running LabVIEW 2009 on Windows XP.

Has anyone succeeded in configuring an EPICS I/O Server for LabVIEW 2009
without the 
Datalogging and Supervisory Control module?

Philip Taylor

============================================================================
===

Philip Taylor                       email : [email protected]
Observatory Sciences Ltd,           Web   :
http://www.observatorysciences.co.uk
8 Sussex Innovation Centre          Phone : (UK)+(0)1223-655603 (VoIP)
Science Park Square                         (UK)+(0)1273-704759 (landline)
University of Sussex                        (UK)+(0)7913-720806 (mobile)
Falmer, BRIGHTON.
BN1 9SB
U.K.

============================================================================
===

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System