EPICS Home EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

Format page
for printing


Search Tech-talk
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: EDM GUI disable/enable
From: "Steve Kinder" <[email protected]>
To: "epics" <[email protected]>
Date: Fri, 11 Dec 2009 10:16:07 -0000
I would like to be able to disable/enable an entire EDM GUI in a manner similar to what happens when an IOC goes away and is restarted. So say a device reset is initiated and you want to disable a GUI whilst that is happening. This could be based on the state of a binary record. Would anyone have a suggestion as to how this might be done please.
 
Regards
 
Steve
 
Replies:
RE: EDM GUI disable/enable tom.cobb
Re: EDM GUI disable/enable Ralph Lange
Navigate by Date:
Prev: Re: OMS MAXv driver Dirk Zimoch
Next: RE: OMS MAXv driver austen.rose
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Reading an array of strings from a Waveform record Andrew Johnson
Next: RE: EDM GUI disable/enable tom.cobb
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 31 Jan 2014 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·