Experimental Physics and
Industrial Control System

Pete,  There was support in synApps 4.6 for an Elcomat autocollimator.
I don't recall the model number, but I think it was 2000.  I converted
the support from Hideos to MPF, but I never got access to the instrument
to test the code.  When it came time to translate from MPF to asyn, I
still could not get access to the instrument to test, so I removed the
code from synApps.

Tim

Pete R. Jemian wrote:

Does anyone have support for the Elcomat 3000 RS232 protocol?

The only item in synApps is an Elcomat.adl screen for MEDM:

https://subversion.xor.aps.anl.gov/synApps/trunk/support/ip/vstub/ipApp/op/adl/Elcomat.adl

--
Tim Mooney ([email protected]) (630)252-5417
Beamline Controls & Data Acquisition Group
Advanced Photon Source, Argonne National Lab.

References:

Elcomat 3000 Pete R. Jemian

Navigate by Date:

Prev: Elcomat 3000 Pete R. Jemian

Next: RE: asyn R4.10, R4.11, R4.12 Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Elcomat 3000 Pete R. Jemian

Next: polling through the gateway Geoff Savage

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024