The E5810A allows only a single EOS character. Are you trying to use a longer end-of-string?
On Dec 5, 2009, at 8:51 PM, Szalata, Zenon M. wrote:
> Hi Eric,
> I am using Agilent E5810A.
>
> Here is a line from the st.cmd file:
>
> vxi11Configure( "L0","134.79.64.25",0,0.0,"gpib0",0,0)
>
> Thank you,
> Zen
>
>
> -----Original Message-----
> From: Eric Norum [mailto:[email protected]]
> Sent: Saturday, December 05, 2009 8:35 PM
> To: Szalata, Zenon M.
> Subject: Re: asyn R4.10, R4.11, R4.12
>
> What GPIB controller are you using?
>
> On Dec 5, 2009, at 5:42 PM, Szalata, Zenon M. wrote:
>
>> I have a simple soft IOC which uses asyn and streamdevice. It does IO
>> with KS3988 GPIB CAMAC crate controller. The IOC works correctly with
>> asyn R4.9. I have installed asyn R4.12 and my IOC does not work with
>> asyn R4.12. I get the following message: "EOS TOO LONG". I also
> tried
>> asyn R4.11 and R4.10 I see the same message with these the two
> versions
>> of asyn as I see with the latest.
>>
>> How do I overcome this difficulty? Do these newer versions of asyn
>> require that I make some change to my IOC? Can someone help me with
>> this, please?
>>
>> For now I am forced to stay with asyn R4.9.
>>
>> Thanks,
>> Zen
>>
>
> --
> Eric Norum
> [email protected]
>
>
>
>
--
Eric Norum
[email protected]
- Replies:
- RE: asyn R4.10, R4.11, R4.12 Szalata, Zenon M.
- References:
- asyn R4.10, R4.11, R4.12 Szalata, Zenon M.
- Navigate by Date:
- Prev:
asyn R4.10, R4.11, R4.12 Szalata, Zenon M.
- Next:
RE: asyn R4.10, R4.11, R4.12 Szalata, Zenon M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
asyn R4.10, R4.11, R4.12 Szalata, Zenon M.
- Next:
RE: asyn R4.10, R4.11, R4.12 Szalata, Zenon M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|