It looks like it should. The interface that Mark shows on his
documentation
(http://cars9.uchicago.edu/software/epics/prosilicaDoc.html) shows this
working for the GC1380H which is in the same family of cameras. Since
he is programming to the vendor's software interface, I would imagine
that this would work.
John
Steve Kinder wrote:
I would like to interface to a Prosilica GE1350 CCD camera and I
believe this should be ok from the areaDetector package. Please could
anyone confirm successful use of this combination or my belief.
Thanks
Steve
--
John Hammonds
Beamline Controls and Data Acquisition Group
APS Engineering Support Division
Argonne National Laboratory
[email protected] <mailto:[email protected]>
(630)252-5317
- References:
- Prosilica GE1350 Steve Kinder
- Navigate by Date:
- Prev:
RE: Prosilica GE1350 Mark Rivers
- Next:
Cross Building Extensions David Dudley
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Prosilica GE1350 Mark Rivers
- Next:
Cross Building Extensions David Dudley
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|