Like Emma, I am having a connect problem, however, it was all working
in another place, so I suspect the serial cable between the Digi
terminal server is the problem. Nevertheless, here are the relevant
software details:
EPICS 3.14.19
RTEMS 4.7
asyn R4-9
in st.cmd:
==========
drvAsynIPPortConfigure("ET-701"."ts-fee-801:2105 TCP",0,0,0)
immediate response:
===================
ts-fee-801:2105 TCP: Link already open!
When the IOC is terminated the Digi shows no connections; when the IOC
is started the Digi shows the connection is there. The Digi port is
of type "TCP".
What 'link' is being referred to here?
Stephen Lewis
[email protected]
650.926.3791
650.926.7963
___o
_`\ <,_
(_)/ (_)
- Replies:
- RE: (Another) Modbus problem Mark Rivers
- Navigate by Date:
- Prev:
RE: Modbus help Mark Rivers
- Next:
Re: CA problem w EPICS 3.14.11 & VxWorks 6.7 Kazuro FURUKAWA
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Mobus R2-0 available Mark Rivers
- Next:
RE: (Another) Modbus problem Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|