EPICS Re: macLib/msi changes with 3.14.10

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: macLib/msi changes with 3.14.10
From:	Andrew Johnson <[email protected]>
To:	Till Straumann <[email protected]>
Cc:	[email protected]
Date:	Mon, 26 Oct 2009 10:12:58 -0500

Hi Till,

On Monday 26 October 2009 09:19:57 Till Straumann wrote:
>
> One more question: I suppose 'dbLoadRecords()' does use macLib
> so that
>
> dbLoadRecords("file_with_<$(xxx,undefined)>.db", "xxx=value")
>
> should work. Correct?

Guaranteed; partially expanding templates using msi is not unusual, so that 
was a major consideration in the development.  This same consideration will 
apply to any/all future changes made to macLib.

- Andrew
-- 
The best FOSS code is written to be read by other humans -- Harald Welte

Replies:: RE: macLib/msi changes with 3.14.10 nick.rees

References:: macLib/msi changes with 3.14.10 Till Straumann; Re: macLib/msi changes with 3.14.10 Andrew Johnson; Re: macLib/msi changes with 3.14.10 Till Straumann

Navigate by Date:: Prev: Re: can't initialize record field with string Burkhard Kolb; Next: Re: can't initialize record field with string Tim Mooney; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: macLib/msi changes with 3.14.10 Till Straumann; Next: RE: macLib/msi changes with 3.14.10 nick.rees; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024