Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017 
<== Date ==> <== Thread ==>

Subject: compiling streamDevice with CALC set fails
From: "Dr. Peter Zumbruch" <P.Zumbruch@gsi.de>
To: EPICS tech-talk <tech-talk@aps.anl.gov>
Date: Wed, 21 Oct 2009 18:02:15 +0200
Hi everybody,
when compiling streamDevice 2.4 from psi web page with CALC set in the
RELEASE file
I get the following output

> base: 3.14.10, Debian 4.0
> ...
> make[2]: Entering directory
> `<EPICS_TOP>/modules/soft/StreamDevice/StreamDevice-2-4/srcSynApps/O.linux-x86'
> Installing created dbd file ../../../dbd/streamSynApps.dbd
> /usr/bin/gcc-3.4 -c   -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS
> -D_XOPEN_SOURCE=500
> -D_X86_  -DUNIX  -D_BSD_SOURCE -Dlinux  -D_REENTRANT -ansi   -O3  
> -Wall      -m32     -g -fPIC
> -I. -I../O.Common -I. -I.. -I../../../include/os/Linux
> -I../../../include  
> -I<EPICS_TOP>/modules/soft/seq/sncseq-2.0.12/include
> -I<EPICS_TOP>/base-3.14.10/include/os/Linux
> -I<EPICS_TOP>/base-3.14.10/include  
> -I<EPICS_TOP>/modules/soft/asyn/asyn-4.10/include  
> -I<EPICS_TOP>/modules/synApps/synApps_5_4_1/support/calc/2-7/include      
>  
> ../devscalcoutStream.c
> /usr/bin/ar -rc   libstreamSynApps.a         devscalcoutStream.o
> /usr/bin/ranlib libstreamSynApps.a
> make[2]: *** No rule to make target
> `../../../lib/linux-x86/libiocsh.a', needed by `libstreamSynApps.so'. 
> Stop.
> make[2]: Leaving directory
> `<EPICS_TOP>/modules/soft/StreamDevice/StreamDevice-2-4/srcSynApps/O.linux-x86'
> make[1]: *** [install.linux-x86] Error 2
> make[1]: Leaving directory
> `<EPICS_TOP>/modules/soft/StreamDevice/StreamDevice-2-4/srcSynApps'
> make: *** [srcSynApps.install] Error 2
without CALC set, everything compiles the right way.

and here the corresponding RELEASE

> #RELEASE Location of external products
> ...
>
> #If using the sequencer, point SNCSEQ at its top directory:
> SNCSEQ=<EPICS_TOP>/modules/soft/seq/sncseq-2.0.12
>
> # EPICS_BASE usually appears last so other apps can override stuff:
> EPICS_BASE=<EPICS_TOP>/base
>
> ASYN=<EPICS_TOP>/modules/soft/asyn/asyn-4.10
> CALC=<EPICS_TOP>/modules/synApps/synApps_5_4_1/support/calc/2-7
> PCRE_INCLUDE=/usr/include/pcre
> PCRE_LIB=/usr/lib

Any help would be appreciated,

Peter

-- 
 Dr. rer. nat. Peter W. Zumbruch
 EE - department / Controls group / GSI
 E-Mail: P.Zumbruch_at_gsi.de
 Tel: +49-(6159)-71-1435 / Fax: +49-(6159)-71-2986
      
 GSI Helmholtzzentrum für Schwerionenforschung GmbH
 Planckstraße 1 / D-64291 Darmstadt / www.gsi.de
 
 Gesellschaft mit beschränkter Haftung
 Sitz der Gesellschaft: Darmstadt
 Handelsregister: Amtsgericht Darmstadt, HRB 1528
 
 Geschäftsführung: Professor Dr. Horst Stöcker, Christiane Neumann
 Vorsitzende des Aufsichtsrates: Dr. Beatrix Vierkorn-Rudolph,
 Stellvertreter: Ministerialdirigent Dr. Rolf Bernhardt



Replies:
Re: compiling streamDevice with CALC set fails Tim Mooney

Navigate by Date:
Prev: RE: CLS OMS 58 Failure Report Elder Matias
Next: Re: compiling streamDevice with CALC set fails Tim Mooney
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017 
Navigate by Thread:
Prev: RE: CLS OMS 58 Failure Report Elder Matias
Next: Re: compiling streamDevice with CALC set fails Tim Mooney
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017 
ANJ, 31 Jan 2014 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·