EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Problem with cothread-1-14 in linux-x86_64
From: Juan Carlos Guzman <[email protected]>
To: [email protected]
Cc: "[email protected]" <[email protected]>
Date: Thu, 1 Oct 2009 13:47:09 +1000
Hello Michael,

Thanks a lot for the patch. I did a quick test of only caget() function of one and a list of PVs and it works fine now. I haven't used camonitor and caput yet as the system now will be used for running experiments for the next week and a half (and the users have a workaround already). I will implement a more thorough testing script of the patch after the finish of the interferometry experiments. I'll let you know the results in a couple of weeks if you can wait for them before releasing cothread-1-15.

Regards,
  Juan.

On 30/09/2009, at 10:48 PM, [email protected] wrote:

From: me
From: Juan Carlos Guzman <[email protected]>
When using cothread-1-14 library on a linux x86_64 platform
(debian-etch kernel 2.6.24) the following error is displayed
when doing a simple caget:
...
If you can let me know if I'm on the right path, I'll work
through all the uses of ctypes and make sure the datatypes
match properly and let you have a release candidate to test.

Ok.

Can you please try the attached patch (this needs to be applied with -p0 instead of -p1 for the previous one) -- you'll need to apply this to the original sources, or revert the previous patch.

Please let me know if this works, and if it does I'll create a 1-15 cothread release and announce it.

--
I apologise, I have no control over the dross below.


This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.

Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.

Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.

Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom



<fields-1-14.patch>

----------
Juan Carlos Guzman
Software Engineer
CSIRO Australia Telescope National Facility (ATNF)
P.O.Box 76, Epping NSW 1710, Australia
Phone: +61 2 9372 4457
Fax: +61 2 9372 4310
Email: [email protected]






References:
RE: Problem with cothread-1-14 in linux-x86_64 michael.abbott

Navigate by Date:
Prev: state notation code flags Patrick Thomas
Next: Re: EPICS Python client application survey Michael Abbott
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: Problem with cothread-1-14 in linux-x86_64 michael.abbott
Next: state notation code flags Patrick Thomas
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024