yes, there is epics support for these in the synapps motor record. i'm
currently using them for controlling laser mirrors as well. we decided to
use the serial interface because of the network connect issues on vxworks.
/david
Szalata, Zenon M. wrote:
I am putting together a system to control Laser mirrors using Picomotor Controllers from New Focus. The system will consist of one Ethernet controller, model 8752 and a number of driver modules, model number 8753.
Has anyone written EPICS device driver/support module for these devices?
Thanks
Zen
--
+-------------------------------------------------+
David M. Kline [email protected]
Beamline Controls and Data Acquisition (BCDA)
Argonne National Laboratory, Advanced Photon Source
Argonne IL, 60439 630.252.8639
---------------------------------------------
Beamlines R Us -- EBRICKs Rule
+-------------------------------------------------+
- References:
- Intelligent Picomotor Control Modules from New Focus Szalata, Zenon M.
- Navigate by Date:
- Prev:
Intelligent Picomotor Control Modules from New Focus Szalata, Zenon M.
- Next:
Re: Agilent LXI via Ethernet + Asyn + StreamDevice? Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Intelligent Picomotor Control Modules from New Focus Szalata, Zenon M.
- Next:
RE: StripTool Y range Kevin Anderson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|