Experimental Physics and
Industrial Control System

6514 support is available in the 'ip' synApps module
    http://www.aps.anl.gov/bcda/synApps/ip/ip.html

ipApp/src/Keithley65xxEM.st (sequence program)
ipApp/Db/Keithley65xxEM.db
ipApp/op/adl/Keithlye65xxEM.adl

---- example configuration

# Keithley 6517A Electrometer
dbLoadRecords("$(IP)/ipApp/Db/Keithley65xxEM.db","P=xxx:,Dmm=EM1,PORT=serial1")

# Keithley 6517A electrometer (10 chan)
seq &Keithley65xxEM,("P=xxx:, Dmm=EM1, channels=10, model=6517A")
---------------------------

This support is based on the Keithley 2K DMM(also in the ip module) which
uses asyn serial ports.

Joe


Pratt, Linda (DLSLtd,RAL,DIA) wrote:

Does anyone have EPICS support for the Keithley 6514 Electrometer for use over RS232? Thanks Linda

Linda Pratt
Software Systems Engineer
Phone: +44 (0)1235 778058
Diamond Light Source

--
Joseph Sullivan
[email protected] <> 630-252-8657
Advanced Photon Source
APS Engineering Services Division
Beamline Controls & Data Acquisition Group

References:

Keithley 6514 Electrometer support for RS232 Pratt, Linda (DLSLtd,RAL,DIA)

Navigate by Date:

Prev: RE: Keithley 6514 Electrometer support for RS232 Krempasky Juraj

Next: ASYN R4-12 Eric Norum

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: Keithley 6514 Electrometer support for RS232 Krempasky Juraj

Next: ASYN R4-12 Eric Norum

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024