Hi Patrick,
we use a similar technique in the VME world when there's need to pass
parameters to drivers, that could be a base address set by h/w jumpers.
Look in the application developers guide for epicsExportRegistrar,
iocshFuncDef, iocshArg and the like - that will allow your st.cmd invoke
a C routine with user set params from your script.
Matthieu
On 07/21/09 23:51, Patrick Thomas wrote:
Hi,
I have created a device driver to interface with a serial to ethernet
adpater, and I was just wondering if it is possible to send the IP
address and port to the driver at initialization, say through an entry
in the st.cmd file?
Thank you,
Patrick
--
Matthieu Bec Gemini Observatory
Tel: +56 51 205785 c/o AURA, Casilla 603
Fax: +56 51 205650 La Serena, Chile
- References:
- driver support initiialization Patrick Thomas
- Navigate by Date:
- Prev:
driver support initiialization Patrick Thomas
- Next:
Re: cainfo does display host info Dirk Zimoch
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
driver support initiialization Patrick Thomas
- Next:
RE: driver support initiialization Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|