Experimental Physics and
Industrial Control System

What OS and IOC hardware?

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Christof Motzko
Sent: Tuesday, July 21, 2009 8:57 AM
To: [email protected]
Subject: How to change baudrate to 921600 in asyn?

Hi,

I am trying to communicate with the I-7565 USB/CAN Converter with 
StreamDevice, which can be used as local serial device. A baud rate of 
921600 is necessary for the Converter, but I can't configure asyn to
this 
baud rate. Can anybody tell me how I can change the baud rate to 921600?

Thanks

Christof

---------------
Christof Motzko

Institut f. Experimentalphysik I
Ruhr-Universitaet-Bochum
Universitaetsstr. 150
D-44780 Bochum

References:

How to change baudrate to 921600 in asyn? Christof Motzko

Navigate by Date:

Prev: How to change baudrate to 921600 in asyn? Christof Motzko

Next: cainfo does display host info Carl Schumann

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: How to change baudrate to 921600 in asyn? Christof Motzko

Next: Re: How to change baudrate to 921600 in asyn? Dirk Zimoch

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024