Experimental Physics and
Industrial Control System

 I have written a soft IOC which reads data from a disk file and places values read into EPICS records.  A few EDM screens are used to display the data...
All of this works fine.
There a number of disk files to choose from.
I have implemented a simple way to specify the file name using a waveform record and a text control.  This scheme is very difficult to use.

I think that EDM does not provide a file name chooser dialog.  Is that true?
If so, has anyone implemented some EDM widget which could be used to choose a file name from existing files on a disk drive?

Thanks in advance,
Zen

Replies:

RE: File Chooser Munro Jr, John K.

Re: File Chooser John Sinclair

References:

choosing snmp version Pierrick Hanlet

Navigate by Date:

Prev: RE: Detecting data lost from a subscriber Dalesio, Leo

Next: Proposed change to ASYN lockPort() Eric Norum

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: choosing snmp version Pierrick Hanlet

Next: RE: File Chooser Munro Jr, John K.

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024