Hi All,
Has anyone interfaced to EPICS via serial interface Pfeiffer Turbo-Molecular Pump station?
Our set is comprised of:
Turbomolecular pump TMH 071 P integrated with TC 100 electronic drive,
Display Control Unit DCU 100 and
Connection box TC 010.
Or any other controller from Pfeiffer to EPICS.
Thanks and regards
Vesna
Vesna Samardzic-Boban | Controls Engineer | Australian Synchrotron
[email protected] | www.synchrotron.org.au
800 Blackburn Road, Clayton, Victoria 3168
<br>This message and any attachments may contain proprietary or confidential information. If you are not the intended recipient or you received the message in error, you must not use, copy or distribute the message. Please notify the sender immediately and destroy the original message. Thank you.
- Replies:
- RE: Pfeiffer Turbo Pump /controller Owens, PH (Peter)
- Re: Pfeiffer Turbo Pump /controller Dirk Zimoch
- Navigate by Date:
- Prev:
RE: problem about environment variables under vxWorks-6.6 Jeff Hill
- Next:
RE: Pfeiffer Turbo Pump /controller Owens, PH (Peter)
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Controlling multiple CAN busses Ralph Lange
- Next:
RE: Pfeiffer Turbo Pump /controller Owens, PH (Peter)
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|