Experimental Physics and
Industrial Control System

I have set up a PV gateway, and the gateway is built against EPICS Base R3.14.10.  When I brought up the gateway, I saw the following errors scrolling up in the log:

...

../../../../src/cas/io/bsdSocket/casDGIntfIO.cc: CA beacon (send to "172.21.40.20:5081") error was "Connection refused"

Jun 11 11:44:57 !!! Errlog message received (message is above)
../../../../src/cas/io/bsdSocket/casDGIntfIO.cc: CA beacon (send to "172.21.40.20:5081") error was "Connection refused"

...

The gateway was up, but not functional at all, I checked the gateway diagnostic panel, nothing was connected, including the gateway's internal PVs.

Any idea?

Thanks,
Jingchen

Navigate by Date:

Prev: EDM / CA error: CA value callback('...'): No data, CA status The requested data transfer is greater than available memory or EPICS_CA_MAX_ARRAY_BYTES Carl Schumann

Next: problem about environment variables under vxWorks-6.6 Andrew Johnson

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: EDM / CA error: CA value callback('...'): No data, CA status The requested data transfer is greater than available memory or EPICS_CA_MAX_ARRAY_BYTES Carl Schumann

Next: FW: PV gateway Jeff Hill

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024