James Stevens wrote:
I would like to know if anyone in the Epics
community has written a GPIB device driver
for the Stanford Research Systems, Inc. Model
PS310 high voltage power supply...
http://www.teknetelectronics.com/Search.asp?p_ID=15873&pDo=DETAIL
Regards--Jim S.
Jim,
There is "unreleased" support for the 300 series in use
at the APS (XOR 8-ID). They are using the PS350. Let me
know if you want to try it.
The support is asyn/streams based.
I have found the GPIB interface to these devices a bit flacky and
required that the GPIB controller be in 'timeout mode' for it to be
reliable. The result was a very slow (2 times sec) update rate.
SRS insisted that there is not a know problem with the unit (shrug).
Joe
--
Joseph Sullivan
[email protected] <> 630-252-8657
Advanced Photon Source
APS Engineering Services Division
Beamline Controls & Data Acquisition Group
- Replies:
- Re: Stanford Research PS310 Power Supply Joe Sullivan
- References:
- Stanford Research PS310 Power Supply James Stevens
- Navigate by Date:
- Prev:
Stanford Research PS310 Power Supply James Stevens
- Next:
Re: Stanford Research PS310 Power Supply Joe Sullivan
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Stanford Research PS310 Power Supply James Stevens
- Next:
Re: Stanford Research PS310 Power Supply Joe Sullivan
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|