Hi Hinko,
From a quick look at the camonitor code it seems to be using a
low-level element count derived from channel access activity for its
printout. For a generic client of this sort such an approach is reasonable.
I think you should use MALM of 2. This should work and would reduce the
trailing zero count
Carl
Hinko Kocevar wrote:
I'm testing the outputs with the camonitor utility supplied with the
EPICS base.
Regards,
Hinko
--
Carl Lionberger
Control System Software Engineer
Berkeley National Laboratory (LBNL)
(510) 486-7503
- Replies:
- Re: subArray processing Hinko Kocevar
- References:
- subArray processing Hinko Kocevar
- Re: subArray processing Carl Lionberger
- Re: subArray processing Hinko Kocevar
- Navigate by Date:
- Prev:
Re: Converting DEC to HEX Tim Mooney
- Next:
Motor Record OMSL field Ron Sluiter
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: subArray processing Hinko Kocevar
- Next:
Re: subArray processing Hinko Kocevar
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|