Experimental Physics and
Industrial Control System

Bruno,

The Channel Access Reference Manual lists these as Read Only

http://www.aps.anl.gov/epics/base/R3-14/10-docs/CAref.html#Channel

Not sure of the issues here.

John

Bruno Coudoin wrote:

Hi,

In Epics 3.14 it is not possible to call ca_put with a non base type.
We get an error telling us this is not supported.

In my case, I would like to let a client write a time stamped data on
the server.

Is there a plan to implement this or is this feature left out on
purpose ?

--
John Hammonds
Beamline Controls and Data Acquisition Group
APS Engineering Support Division

Argonne National Laboratory
[email protected] <mailto:[email protected]>
(630)252-5317

Replies:

Re: ca_put with non base type Bruno Coudoin

References:

ca_put with non base type Bruno Coudoin

Navigate by Date:

Prev: ca_put with non base type Bruno Coudoin

Next: NTPTimeSync timeout messages on VxWorks with EPICS 3.14.10 J. Lewis Muir

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: ca_put with non base type Bruno Coudoin

Next: Re: ca_put with non base type Bruno Coudoin

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024