Hi Bob,
Dalesio, Leo wrote:
DESY would like to see the following changes:
SMOO applies to all values returned from device support - weather or not they need to be converted. This should have no impact - as device support that returns engineering numbers likely does not have SMOO set to anything. Same thing for returning values from database links that are inputs. Any objections?
I think that would break device supports that emulate the SMOO behavior when
returning numbers in engineering units. I have written a few of them.
Add the following fields
TOUT - timeout before raising an INVALID/TIMEOUT alarm when the record has not
been processed (esp. in Passive or I/O Intr scanning mode).
Dirk
--
Dr. Dirk Zimoch
Paul Scherrer Institut, WBGB/006
5232 Villigen PSI, Switzerland
Phone +41 56 310 5182
- References:
- Smoothing and alarm filtering on the analog input record - a proposal Dalesio, Leo
- Navigate by Date:
- Prev:
connections with pasynOctetSyncIO->connect John Hammonds
- Next:
RE: connections with pasynOctetSyncIO->connect Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Smoothing and alarm filtering on the analog input record - a proposal Kasemir, Kay
- Next:
connections with pasynOctetSyncIO->connect John Hammonds
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|