Pierrick,
As you know, edm can be a pain to configure. Start by reading the
chapter on configuration in the user's manual at
http://ics-web.sns.ornl.gov/edm/edmUserManual
Examine $EDMOBJECTS/edmObjects and $EDMOBJECTS/edmPvObjects and make
sure all library references make sense.
Also, do ldd `which`/edm and make sure the library locations are what
you expect.
John Sinclair
Pierrick Hanlet wrote:
Hi,
I've developed a fake ioc and some edm panels to view the ioc data. It runs
beautifully on my laptop. I've copied the software to our epics server and
now when I attempt to execute the edm panel, edm crashes with a
segmentation fault error. The only problem appears to be in executing.
Any ideas?
Thanks,
Pierrick
-----------------------------------------------------------------------------------------
Pierrick Hanlet
Fermilab, P.O. Box 500, M.S. 122
Batavia, IL 60510
[email protected]
(630)840-5555/8871/6039 office/lab/fax
http://www-d0.fnal.gov/~hanlet
"Whether you think you can or think you can't, either way, you are correct" -- Henry Ford
- References:
- edm crashing in execute mode Pierrick Hanlet
- Navigate by Date:
- Prev:
RE: How to usr XtAddInput on CA's file descriptors? Jeff Hill
- Next:
Re: Attribute events; was: Alarm Limits Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: edm crashing in execute mode J. Lewis Muir
- Next:
Re: edm crashing in execute mode Pierrick Hanlet
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|