At NSLS II, we are integrating our power supplies through a synchronous device interface. This is a high speed synchronous bus that can update power supply setpoints at 10 KHz. It can also upload diagnostic data in the spare bandwidth. The power supply controller does not talk directly to EPICS - it communicates over this redundant synchronous link.
We are going to do some network studies here to understand if each power supply should run IOC core. What does that do to the clients? The network?
Bob
- References:
- Looking for feedback on what epics users require Pawel Kowalski - BiRa Systems Inc.
- Re: Looking for feedback on what epics users require Tim Mooney
- Navigate by Date:
- Prev:
Re: Looking for feedback on what epics users require Tim Mooney
- Next:
Re: Looking for feedback on what epics users require Claude Saunders
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Looking for feedback on what epics users require Tim Mooney
- Next:
RE: Looking for feedback on what epics users require Pawel Kowalski - BiRa Systems Inc.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|