Experimental Physics and
| |||||||||||||||
|
Hello,
My company is
researching providing an epics IOC with some of our power supplies. I would like
to get some feedback from the epics community on what exactly would be required.
First let me start off by saying that epics is still a new area for me so
hopefully these questions aren't dumb, we are still in the early research stages
on this.
What we would like
to do is provide a system with each device that will host an EPICS IOC. This
will be a vxWorks based system running epics base 3.14. This system will
communicate with our device using ethernet and convert standard UDP commands
that our devices work on to process variables. So for example our clients would
now have a process variable they could use to monitor or set the voltage of a
power supply (IE: powersys:voltage).
For the client side
we would like to develop a LabVIEW interface, we would most likely not be
developing a custom C/C++ application for the client.
Would this be
adequate for most epics users or would more be required to integrate this into
an existing epics network? Would people use the LabVIEW client we develop or do
most labs use their own custom software to control/monitor epics
enabled equipment? Any feedback from the community would be greatly
appreciated, thank you.
| ||||||||||||||
ANJ, 31 Jan 2014 |
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing · |