Experimental Physics and
Industrial Control System

Hi,

If the "all_com_32.db" is loaded in the database, it triggered system
crash  while we were running one of our RTEMS applications.
I traced down that the bugs were caused by the "transform" record
(e.g. transformRecord.c) for the motor "allstop" function.  However,
a generic record "dfanout" can replace it to function correctly.
The attached all_com_32.db is what I used to solve the problem.
It seems to work so far.

Regards,
Kate

grecord(bo,"$(P)allstop") {
   field(DOL,"1")
   field(OUT,"$(P)allstop1.VAL  PP MS")
}
grecord(bo,"$(P)gateOpen") {
   field(ZNAM,"Closed")
   field(ONAM,"Open")
}
grecord(calc,"$(P)alldoneBlinker") {
   field(SCAN,".5 second")
   field(CALC,"B?0:!A")
   field(INPA,"$(P)alldoneBlinker.VAL  NPP NMS")
   field(INPB,"$(P)alldone.VAL  NPP NMS")
}
grecord(dfanout,"$(P)allstop5") {
   field(DESC,"allstop distribution")
   field(OMSL,"closed_loop")
   field(DOL,"1")
   field(OUTA,"$(P)m25.STOP  CA MS")
   field(OUTB,"$(P)m26.STOP  CA MS")
   field(OUTC,"$(P)m27.STOP  CA MS")
   field(OUTD,"$(P)m28.STOP  CA MS")
   field(OUTE,"$(P)m29.STOP  CA MS")
   field(OUTF,"$(P)m30.STOP  CA MS")
   field(OUTG,"$(P)m31.STOP  CA MS")
   field(OUTH,"$(P)m32.STOP  CA MS")
}
grecord(dfanout,"$(P)allstop4") {
   field(DESC,"allstop distribution")
   field(OMSL,"closed_loop")
   field(DOL,"1")
   field(OUTA,"$(P)m17.STOP  CA MS")
   field(OUTB,"$(P)m18.STOP  CA MS")
   field(OUTC,"$(P)m19.STOP  CA MS")
   field(OUTD,"$(P)m20.STOP  CA MS")
   field(OUTE,"$(P)m21.STOP  CA MS")
   field(OUTF,"$(P)m22.STOP  CA MS")
   field(OUTG,"$(P)m23.STOP  CA MS")
   field(OUTH,"$(P)m24.STOP  CA MS")
}
grecord(dfanout,"$(P)allstop3") {
   field(DESC,"allstop distribution")
   field(DOL,"1")
   field(OUTA,"$(P)m9.STOP  CA MS")
   field(OUTB,"$(P)m10.STOP  CA MS")
   field(OUTC,"$(P)m11.STOP  CA MS")
   field(OUTD,"$(P)m12.STOP  CA MS")
   field(OUTE,"$(P)m13.STOP  CA MS")
   field(OUTF,"$(P)m14.STOP  CA MS")
   field(OUTG,"$(P)m15.STOP  CA MS")
   field(OUTH,"$(P)m16.STOP  CA MS")
}
grecord(dfanout,"$(P)allstop2") {
   field(DESC,"allstop distribution")
   field(OMSL,"closed_loop")
   field(DOL,"1")
   field(OUTA,"$(P)m1.STOP  CA MS")
   field(OUTB,"$(P)m2.STOP  CA MS")
   field(OUTC,"$(P)m3.STOP  CA MS")
   field(OUTD,"$(P)m4.STOP  CA MS")
   field(OUTE,"$(P)m5.STOP  CA MS")
   field(OUTF,"$(P)m6.STOP  CA MS")
   field(OUTG,"$(P)m7.STOP  CA MS")
   field(OUTH,"$(P)m8.STOP  CA MS")
}
grecord(dfanout,"$(P)allstop1") {
   field(DESC,"allstop distribution")
   field(OMSL,"closed_loop")
   field(DOL,"1")
   field(OUTA,"$(P)AbortScans.PROC  PP MS")
   field(OUTB,"$(P)allstop2.VAL  PP MS")
   field(OUTC,"$(P)allstop3.VAL  PP MS")
   field(OUTD,"$(P)allstop4.VAL  PP MS")
   field(OUTE,"$(P)allstop5.VAL  PP MS")
}
grecord(swait,"$(P)alldone") {
   field(DESC,"All motors done moving")
   field(SCAN,"I/O Intr")
   field(PINI,"YES")
   field(INAN,"$(P)alldone_1.VAL")
   field(INBN,"$(P)alldone_2.VAL")
   field(INCN,"$(P)alldone_3.VAL")
   field(INDN,"$(P)alldone_4.VAL")
   field(ININ,"$(P)gateOpen.VAL")
   field(CALC,"A&&B&&C&&D&&!I")
   field(DOLD,"1")
}
grecord(swait,"$(P)alldone_2") {
   field(DESC,"8 motors done moving")
   field(SCAN,"I/O Intr")
   field(PINI,"YES")
   field(INAN,"$(P)m9.DMOV")
   field(INBN,"$(P)m10.DMOV")
   field(INCN,"$(P)m11.DMOV")
   field(INDN,"$(P)m12.DMOV")
   field(INEN,"$(P)m13.DMOV")
   field(INFN,"$(P)m14.DMOV")
   field(INGN,"$(P)m15.DMOV")
   field(INHN,"$(P)m16.DMOV")
   field(CALC,"(a&b&c&d&e&f&g&h)=1")
   field(OOPT,"Transition To Non-zero")
   field(DOLD,"1")
}
grecord(swait,"$(P)alldone_1") {
   field(DESC,"8 motors done moving")
   field(SCAN,"I/O Intr")
   field(PINI,"YES")
   field(INAN,"$(P)m1.DMOV")
   field(INBN,"$(P)m2.DMOV")
   field(INCN,"$(P)m3.DMOV")
   field(INDN,"$(P)m4.DMOV")
   field(INEN,"$(P)m5.DMOV")
   field(INFN,"$(P)m6.DMOV")
   field(INGN,"$(P)m7.DMOV")
   field(INHN,"$(P)m8.DMOV")
   field(CALC,"(a&b&c&d&e&f&g&h)=1")
   field(OOPT,"Transition To Non-zero")
   field(DOLD,"1")
}
grecord(swait,"$(P)alldone_3") {
   field(DESC,"8 motors done moving")
   field(SCAN,"I/O Intr")
   field(PINI,"YES")
   field(INAN,"$(P)m17.DMOV")
   field(INBN,"$(P)m18.DMOV")
   field(INCN,"$(P)m19.DMOV")
   field(INDN,"$(P)m20.DMOV")
   field(INEN,"$(P)m21.DMOV")
   field(INFN,"$(P)m22.DMOV")
   field(INGN,"$(P)m23.DMOV")
   field(INHN,"$(P)m24.DMOV")
   field(CALC,"(a&b&c&d&e&f&g&h)=1")
   field(OOPT,"Transition To Non-zero")
   field(DOLD,"1")
}
grecord(swait,"$(P)alldone_4") {
   field(DESC,"8 motors done moving")
   field(SCAN,"I/O Intr")
   field(PINI,"YES")
   field(INAN,"$(P)m25.DMOV")
   field(INBN,"$(P)m26.DMOV")
   field(INCN,"$(P)m27.DMOV")
   field(INDN,"$(P)m28.DMOV")
   field(INEN,"$(P)m29.DMOV")
   field(INFN,"$(P)m30.DMOV")
   field(INGN,"$(P)m31.DMOV")
   field(INHN,"$(P)m32.DMOV")
   field(CALC,"(a&b&c&d&e&f&g&h)=1")
   field(OOPT,"Transition To Non-zero")
   field(DOLD,"1")
}
grecord(swait,"$(P)alldoneBlink") {
   field(SCAN,"I/O Intr")
   field(INAN,"$(P)alldone")
   field(INBN,"$(P)alldoneBlinker")
   field(CALC,"a?0:b")
}

Replies:

RE: stop all motors Mark Rivers

Re: stop all motors Tim Mooney

Navigate by Date:

Prev: Re: webca can't connect to pvs? Andrew Johnson

Next: RE: stop all motors Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: webca can't connect to pvs? Purcell, J. David

Next: RE: stop all motors Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024