Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017 
<== Date ==> <== Thread ==>

Subject: Re: Scilab and epics
From: Till Straumann <strauman@slac.stanford.edu>
To: Emmanuel Mayssat <emmanuel_mayssat@lynceantech.com>
Cc: cecile_limborg@lynceantech.com, epics <tech-talk@aps.anl.gov>
Date: Thu, 08 Jan 2009 10:56:47 -0800
Emmanuel Mayssat wrote:
Dear all,

Happy new year!
I am using epics and scilab.
I was wondering if any one of you is using the channel access interface
to link the 2. Is anyone of you using labca? other?

Regards,
--
Emmanuel


I (obviously) use epics/scilab/labca. As a matter of fact,
I first developed labca for scilab and added matlab support
later.

-- Till

References:
Scilab and epics Emmanuel Mayssat

Navigate by Date:
Prev: USB streaming device to linux/epics Emmanuel Mayssat
Next: Re: EPICs base MingW32 compilation failed ! Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017 
Navigate by Thread:
Prev: Scilab and epics Emmanuel Mayssat
Next: USB streaming device to linux/epics Emmanuel Mayssat
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017 
ANJ, 31 Jan 2014 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·