Experimental Physics and
Industrial Control System

"Silver" <[email protected]> · Wed, 15 Oct 2008 15:53:09 +0800

hi, Mauro Giacchini:

  Is it possible to build liveEPICS using Puppy?

======= At 2008-10-15, 15:26:35 you wrote: =======

>Dear Sir,
>Thank you for this release.
>
>It is very good. I have checked it. But one problem I which i can see
>here is that it is not displaying the fonts properly and gives the
>following error.
>
>What is to be done?
>
>with regards.
>
>U. Panda
>
>VECC, India
>
>root@slax:/opt/epics/extensions/bin/linux-x86# ./medm
>
>
>medmInit: Unable to load font widgetDM_4
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_6
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_8
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_10
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_12
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_14
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_16
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_18
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_20
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_22
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_24
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_30
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_36
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_40
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_48
>  Trying default (fixed) instead
>
>medmInit: Unable to load font widgetDM_60
>  Trying default (fixed) instead
>MEDM Version 3.1.2.1: Loading aliased fonts.................
>XtUngrabButton(displayDA,3,0)
>root@slax:/opt/epics/extensions/bin/linux-x86# ./probe
>Unable to load font!
>
>Unable to load font1!
>
>Unable to load font2!
>
>
>
>On Sat, Oct 11, 2008 at 2:37 PM, Mauro Giacchini
><[email protected]> wrote:
>> Dear folks,
>>
>> a first pre-release of LivEPICS using a USB key to boot is now available for
>> general download and testing. That is equipped with Nagios 3.03
>> pre-configured to be used like a NAL
>> (http://www.lnl.infn.it/~epics/NAL.html).
>>
>> The tarball containing all the stuff for this version is at
>> http://www.lnl.infn.it/~epics/LivEPICS/Slackware/Slax6.0/
>> The HowTo install on USB Key:
>> http://www.lnl.infn.it/~epics/LivEPICS/Slackware/Slax6.0/howtoinstall.html
>> The software included list:
>> http://www.lnl.infn.it/~epics/LivEPICS/Slackware/Slax6.0/softwarelist.html
>>
>>
>> Mauro
>>
>> --
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> Mauro Giacchini
>>
>> Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Legnaro
>> V.le dell'Universita', 2
>> 35020 LEGNARO (PD) ? ITALY
>> Tel. +39.049.8068558
>> Fax. +39.049.641925
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>>
>>

= = = = = = = = = = = = = = = = = = = =

Best regards				 
Geyang 2008-10-15

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System