Experimental Physics and
Industrial Control System

Evgeniy Tikhomolov <[email protected]> · Mon, 29 Sep 2008 17:11:02 -0700

Hi,
Building stops with these last messages:
udpiiu::badUDPRespAction(ca_hdr const &, osiSockAddr const &, epicsTime
const &)0x130 udpiiu.o

udpiiu::badUDPRespAction(ca_hdr const &, osiSockAddr const &, epicsTime
const &)0x138 udpiiu.o

udpiiu::badUDPRespAction(ca_hdr const &, osiSockAddr const &, epicsTime
const &)0x148 udpiiu.o

udpiiu::badUDPRespAction(ca_hdr const &, osiSockAddr const &, epicsTime
const &)0x160 udpiiu.o

udpiiu::badUDPRespAction(ca_hdr const &, osiSockAddr const &, epicsTime
const &)0x168 udpiiu.o

udpiiu::versionAction(ca_hdr const &, osiSockAddr const &, epicsTime
const &)0xe8 udpiiu.o

udpiiu::searchRespAction(ca_hdr const &, osiSockAddr const &, epicsTime
const &)0x118 udpiiu.o

udpiiu::beaconAction(ca_hdr const &, osiSockAddr const &, epicsTime
const &)0x150 udpiiu.o

udpiiu::notHereRespAction(ca_hdr const &, osiSockAddr const &, epicsTime
const &)0x158 udpiiu.o

ld: fatal: relocations remain against allocatable but non-writable sections

collect2: ld returned 1 exit status

gmake[2]: *** [libca.so] Error 1

gmake[2]: Leaving directory
`/space/usr1/epics/release/R3.14.9/base-3.14.9/src/ca/O.solaris-sparc-gnu'

gmake[1]: *** [install.solaris-sparc-gnu] Error 2

gmake[1]: Leaving directory
`/space/usr1/epics/release/R3.14.9/base-3.14.9/src/ca'

gmake: *** [ca.install] Error 2
Manipulating with flag -fPIC doesn't help.
Building R14.6 on the same machine with the same environment was
successful.
Does anybody know solution?
Thanks,
Evgeniy

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System