Dear Sir,
We have also a similar application related to Siemens PLC and EPICS.
We have written a program in siemens s7 PLC for Modbus TCP slave. We
are using AG-SEND and AG-RECEIVE function block of S7 siemens PLC. On
EPICS side we are using Mark Rivers' Modbus device support.
It is now tested for function code 01 (read multiple coils), 03 (read
multiple registers), 05 (write single coil), 06 (write single
register). We are now trying to write siemens side program for other
multiple write function codes.
If you have some program regarding siemens PLC modbus TCP slave code
which can take care of multiple register write (function code 16),
please share with us.
With regards
U. Panda
Variable Energy Cyclotron Centre
Kolkata, India
On Thu, Sep 25, 2008 at 9:24 PM, Rod Nussbaumer <[email protected]> wrote:
> Dalesio, Leo wrote:
>>
>> Has anyone integrated the diagnostics from SIemen's PLCs into EPICS?
>> Thanks,
>> Bob
>>
> Not sure exactly what you mean by 'diagnostics'. If you mean EPICS device
> support for Siemens PLCs, I have a work in progress that is fairly well
> advanced, on that level. It is for Siemens S7 style protocol, and is based
> heavily on Mark Rivers' Modbus device support.
>
> Rod Nussbaumer
> ISAC Controls, TRIUMF
> Vancouver, Canada
>
>
>
--
- References:
- SIemens PLCs Dalesio, Leo
- Re: SIemens PLCs Rod Nussbaumer
- Navigate by Date:
- Prev:
RE: ASYN R4.10 Release - code depreciation Pearson, MR (Matthew)
- Next:
Re: SIemens PLCs Matthias Clausen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Siemens PLCs Ralph Lange
- Next:
Re: SIemens PLCs Matthias Clausen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|