Experimental Physics and
Industrial Control System

Ned Arnold <[email protected]> · Tue, 8 Jul 2008 15:38:06 -0500

Here's a paper from ICALEPCS07 that describes running an EPICS IOC on
the Moxa-box ... pretty cool.
http://cern.ch/AccelConf/ica07/PAPERS/WPPA06.PDF

 Ned

On Jul 8, 2008, at 2:46 PM, Steve Shoaf wrote:
Dave,
At the APS we have been using the MOXA Nport serial device servers.
They come in 1, 2, 4, 8, or 16 port versions. We use the 5410 4-
port model the most which costs around $400. We've been using them
for several years and they work fine.
http://www.moxa.com/product/External_Device_Servers.htm

Steve Shoaf
Advanced Photon Source
Controls Group
On Jul 8, 2008, at 2:17 PM, Dave Reid wrote:
Hi everyone...
We are looking for an Ethernet-to-RS232 device that we can use in a
manner similar to the Agilent GPIB gateway, meaning using ASYN to
send messages out over our network and then out to RS232 devices.
Is anyone else doing this? Have a product that they've had good
results with or any to avoid?
Thanks...
dave reid
University of Washington Medical Center

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System