My CAMAC driver does DMA under vxWorks. It should not matter what CPU
is being used, so it should work on the MVME6100 (it definitely works on
the MVME2700 and MVME167). Mine is older vxWorks specific code, not
OSI.
http://cars.uchicago.edu/software/epics/camac.html
Mark
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Szalata, Zenon M.
Sent: Tuesday, July 01, 2008 2:45 PM
To: EPICS Techtalk
Subject: Epics DMA for the MVME6100
I need to add support for DMA data transfer to a device driver that I am
writing. The processor is MVME6100, OS is vxWorks, and I am writing the
device driver using Epics OSI routines. Has anyone written DMA support
for this combination?
Thanks in advance,
Zen
- References:
- Epics DMA for the MVME6100 Szalata, Zenon M.
- Navigate by Date:
- Prev:
Re: Epics DMA for the MVME6100 Till Straumann
- Next:
Re: Epics DMA for the MVME6100 Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Epics DMA for the MVME6100 Till Straumann
- Next:
Re: Epics DMA for the MVME6100 Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|