Dear EPICS Users,
ZTEC Instruments is pleased to announce our new
Ethernet/LAN-based ZT4210 EPICS oscilloscopes. Key for the EPICS community, the
ZT4210 EPICS units include an embedded EPICS IOC which provides process
variables (PVs) for control and query of all instrument functions.
The ZT4210 EPICS units come with 2 or 4 input channels. Key
specifications include 300 MHz analog bandwidth, 1 GS/s sampling, and record
lengths up to 256Mpoints. The ZT4210 EPICS scopes deliver high channel density
(2 or 4 channels in a 1U height, half-rack width package) and are
rack-mountable. Additionally, the ZT4210 gives you the features and analysis
tools that you would expect from a much larger benchtop oscilloscope.
-
Performs onboard waveform math using
four dedicated CALC channels
-
Includes advanced triggering (edge,
pulse width, glitch, A-->B, and more)
-
Calculates over 40 waveform
parameters
The ZT4210 has a robust analog front end - offering input
ranges from 400 Vpp down to 12.5 mVpp and a maximum input of +/-300V (1 M-Ohm
input)
With the introduction of the ZT4210, ZTEC now offers EPICS
users two oscilloscopes designed to address a variety of remote test and
monitoring needs:
- ZT4210
EPICS (www.ztecinstruments.com/tech-talk-zt4210) 2
or 4 input channels 300 MHz bandwidth 1
GS/s max sampling 256Mpoint
max record length
- ZT4610
EPICS (www.ztecinstruments.com/tech-talk-zt4610) 2
or 4 input channels 1 GHz bandwidth 4
GS/s max sampling 64Mpoint
max record length
Our goal with the ZT4000 series EPICS oscilloscopes is to
provide EPICS users with high performance oscilloscopes that offer benchtop
scope functionality and that seamlessly integrate into the EPICS environment.
Best Regards,
ZTEC Instruments
www.ztecinstruments.com/EPICS