Experimental Physics and
Industrial Control System

"Gillingham, IJ (Ian)" <[email protected]> · Fri, 27 Jun 2008 09:14:43 +0100

Hello Victor,

If it's of any use to you, I have written an EPICS driver and support
(database templates and EDM user interface) for the iseg VHS40x VME
boards. It does not have a CAN interface, but perhaps the higher level
support (above the driver) may be of use to you.

Regards,
Ian

	Ian Gillingham
	Senior Electronic Systems Engineer
	Diamond Light Source
	Diamond House (G.01)
	Harwell Science and Innovation Campus
	Didcot
	Oxfordshire OX11 0DE
	UK

	Tel: +44 (0)1235 778129
	Fax:+44 (0)1235 778468
	Email: [email protected]

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of [email protected]
Sent: 27 June 2008 09:05
To: [email protected]
Subject: EPICS driver for iseg HV

  Dear all,

  We are looking to implement EPICS to drive a iseg HV using 
CAN-interface so we are searching for the EPICS drivers for one the 
following devices:

  NHQ 236L
  NHQ 234L
  ECH 12A-CAN

  If none of this is available we will be happy even with an EPICS 
driver for any of the iseg HV units which use CAN-bus. Thank you for 
your time.

  Best regards,
  Victor

Name  V I Stoica (KVI)
Department/Division  Experimentele Kernfysica,KVI
Postal Address  Zernikelaan 25
9747AA
Groningen
E-Mail Address  [email protected]
<DIV><FONT size="1" color="gray">This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
</FONT></DIV> 

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System