John,
> We're running several NSLS beamlines with 5.3 motor records under RTEMS.
> I got the motor code from Bill Nolan, who might have gotten it from Kate
> Feng. We'd like to upgrade our motor records, but I've tried 6.1 and 6.3
> and I get "motor_init_record_com(): card does not exist!" errors. Is
> anyone using motor records beyond 5.3 under RTEMS?
At SSRL we are running motor record 6.2 under RTEMS. Stephanie Allison has made some changes to the code we got from Kate Feng. We got the same initialization error you did when using a MAXv motor controller until we jumpered the card to allow Supervisory Access.
--Harvey
----
Harvey Rarback phone: (650)926-3963
Stanford Linear Accelerator Center fax: (650)926-4100
2575 Sand Hill Road home phone: (650)560-9111
Menlo Park, CA 94025
[email protected] http://ssrl.slac.stanford.edu/~rarback
"Always tell the truth, that way you don't have to keep track."
Pogo
- Replies:
- Re: latest motor record on RTEMS? John M. Skinner
- References:
- latest motor record on RTEMS? John M. Skinner
- Navigate by Date:
- Prev:
latest motor record on RTEMS? John M. Skinner
- Next:
Re: latest motor record on RTEMS? Steve Shoaf
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
latest motor record on RTEMS? John M. Skinner
- Next:
Re: latest motor record on RTEMS? John M. Skinner
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|