I have observed the following undesirable behavior in a combination of longout record and a EDM Text Control widget set to display format "Hex":
When I enter the value 0x80000000 in the text control, it gets converted in the record to 0x7fffffff. I suppose that either the EDM widget or the epics longout record perform signed conversion. But why 0x7fffffff? I have tested this on a pure software IOC running on Linux. Now, when I enter 0x80000000 I want that to be the value in the record. Is it possible that longout is not appropriate for this? If so, what record type should I use?
Thanks in advance,
Zen
- Replies:
- Re: Longout Record ? Andrew Johnson
- Navigate by Date:
- Prev:
Re: registering IOC shell functions Eric Norum
- Next:
Re: Longout Record ? Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: How to Upgrade Epics R3.13 device driver to Epics R3.14 Eric Norum
- Next:
Re: Longout Record ? Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|