I am using seq-R2-0-11 with epics R3-14-9. I have written a simple sequencer code in which I tried to get a value from a stringin record. For testing I have these two definitions:
char name1[SPATH]; assign name1 to "{P}{M}WF_NAME"; monitor name1;
char name2[SPATH]; assign name2 to "{P}{M}S_NAME"; monitor name2;
Where name1 is assigned to a waveform record and name2 is assigned to a stringin record. Both these records are given some character string values. I can obtain the value from the waveform record but I get nothing from the stringin record. In each case I use pvGet function. This test was precipitated when my sequencer code failed to get the string from the DESC field of a longin record.
Is it not possible to get an ASCII coded string either from a stringin record or the DESC field from any record into a sequencer program? It seems to me that it should be possible since it works with caget! Am I overlooking something simple and basic? How can this be done? Can anyone help, please?
Thanks in advance,
Zen
- Replies:
- RE: Problem with SEQ Mark Rivers
- Navigate by Date:
- Prev:
EPICS Collaboration Meeting, Legnaro, Italy Dalesio, Leo
- Next:
RE: Problem with SEQ Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EPICS Collaboration Meeting, Legnaro, Italy Dalesio, Leo
- Next:
RE: Problem with SEQ Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|