Experimental Physics and
Industrial Control System

Steve,
 
My Modbus driver should talk to it, but you would need to add the device-specific code.
 
http://cars.uchicago.edu/software/epics/modbus.html
 
 
Mark
 

________________________________

From: [email protected] on behalf of Steve Lewis
Sent: Fri 5/16/2008 4:59 PM
To: [email protected]
Cc: Keith Kishiyama
Subject: Looking for support for Eurotherm 2404 PID



The Eurotherm 2404 PID is a temperature controller that uses the
Modbus protocol over a serial .  Does anyone have a streamdevice/asyn
protocol or any other device/driver support for it?
--
______________________________________________________________
Stephen A. Lewis                        |
Linac Coherent Light Source             | [email protected]
Lawrence Livermore National Laboratory  | Tel: 925.423.4751
7000 East Ave, L-210                    | FAX: 925.423.1488
Livermore, CA 94550                     | http://www.llnl.gov <http://www.llnl.gov/> 

Replies:

RE: Looking for support for Eurotherm 2404 PID Mark Rivers

References:

Looking for support for Eurotherm 2404 PID Steve Lewis

Navigate by Date:

Prev: Looking for support for Eurotherm 2404 PID Steve Lewis

Next: RE: Looking for support for Eurotherm 2404 PID Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Looking for support for Eurotherm 2404 PID Steve Lewis

Next: RE: Looking for support for Eurotherm 2404 PID Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024